"Failed To Create Profile" Error when setting up on Google Apps Sync for Microsoft Outlook

Should you encounter this issue, try this:

1. Go to control panel
2. Select Mail
3. Select "Show Profiles"
4. Should you see any existing google mail profiles, select it, and click "remove".
5. Hit OK.

Then try setting up on Google Apps Sync for Microsoft Outlook.

I've tried this on Microsoft Windows 7 - 64 bit, running Microsoft Outlook 2013 - 64 bit as well.

Good luck!

MakerBot: Replicator 2

If you're into 3D modelling, but can't afford to get yourself a super-expensive 3D printer, then the new MakerBot: Replicator 2 may be an option for you. At USD$2,199, this is still much cheaper than the commercial 3D printers out there. The Replicator 2 uses heat extrusion method, as opposed to the more common STL (Stereolitography) method, which is much cheaper in the long run when producing your models. Previous extrusion 3D printers tend to produce very coarse results which needed post production work to smooth out the rough edges, however this new model boast a 100 micron resolution, where each layer is as thin as a piece of paper!

While the price tag could still be out of reach for most of us, expect it to drop as the demand for these printers increase. Regardless, if you already plan to buy it, check out the following link for more info: http://store.makerbot.com/replicator2.html

Yahoo! Mail on Outlook 2013

Do you want to get Yahoo! Mail on Outlook for free? Try this!

1. Launch your Outlook (I'm using 2013 for this example, but previous versions should work as well).
2. Select the "FILE" tab on top left corner and select "Account and Social Network Settings" under Account Information.
3. Click on Account Settings, and in the dropdown, select "Account Settings".
4. In the dialog window, under the E-mail tab, select New.
5. Under Choose Service, Select "Email Account". Then click Next.
6. Select "POP or IMAP", and hit Next.
7. Under the POP and IMAP Account Settings, fill in your name and email address.
8. For Server Information, fill in the following:
1. Account Type: IMAP
2. Incoming mail server: imap-ssl.mail.yahoo.com
3. Outgoing mail server (SMTP): smtp.mail.yahoo.com
9. Logon Information:
1. User name: <youryahoologin>@yahoo.com
2. Password: your yahoo password
3. Check Remember Password
10. Leave "Require logon using Secure Password Authentication (SPA)" unchecked.
11. Hit More Settings:
1. Under the "Outgoing Server" tab:
1. Check "My outgoing server (SMTP) requires authentication
2. Select "Log on using"
1. User Name: <youryahologin>@yahoo.com
2. Password: your yahoo password
3. Check Remember Password
2. Under Advanced:
1. Under Server Port Numbers:
1. Incoming server (IMAP): 143
2. Leave "Use the following type of encrypted connection:" as "None" (this can help to prevent certificate issues, which can be extremely annoying).
3. Outgoing server (SMTP): 465
4. Select "Use the following type of encrypted connect:" as "SSL".
3. Leave the rest as is.
12.  Hit OK to close the dialog and return back to the settings windows.
13. Hit Next and you should be done!

It should take a while to import all your mail, especially if you have lots of it. Your folders should also appear.

Hopefully, the settings would work for you. Let me know how it goes in the comments!

Getting GMail on Outlook 2013

Google Apps Sync for Outlook currently only supports up to Outlook 2010. If you're using Outlook 2013, then you're out of luck of getting your Gmail in with Outlook. However, the good news is that there's a workaround, and though it's bit tedious, the end result is worth it.

First off, if you're upgrading from Outlook 2010, and you already have your GMail setup in your Outlook 2010, then it's much simpler to pull this off. However, just take note that you need to have the right platform of the Google Apps Sync tool to work. If you're currently running Microsoft Office 32bit, that would also mean that the Google Apps Sync tool you have is also on 32 bit. Hence, when you upgrade to Office 2013, it would be best if you upgraded to a 32 bit version of the Office suite as well. The same would go if you're on 64 bit. Just upgrade to the same platform to avoid complications.

Once you're done with Office upgrade, you would notice that if you tried to launch your Outlook, you will get some error message and your email won't sync. Fret not, just try this trick:

Make sure your Outlook is closed. Then using Windows Explorer, head towards this directory:
C:\Program Files\Google\Google Apps Sync\ and locate these 2 files:

gsync32.dll 

unifiedlogin.dll   

Copy both these files and head over to C:\Program Files\Microsoft Office\Office15\ and paste them in.

Fire up your Outlook and it should work again.

Secondly, if you're on fresh PC with no Microsoft Office installed, you will need to find a copy of Microsoft Office 2010 and install with that first. (A trial version will work as well). Make sure you take note of the platform again (32 bit or 64 bit). If you're planning to use 64 bit version of the Office 2013, then make sure you install the 64 bit version of Office 2010. Once you're done, download the Google Apps Sync (again, align the platform version with the office version). Install it, and follow the instructions to setup your Google Account. Make sure your profile have been successfully created. After that, follow the instruction above to upgrade your Office to 2013 version. 

If you already have Microsoft Office 2013 installed without the Google Apps Sync setup, best is that you uninstall the 2013 and install 2010 first, setup the Google Apps Sync, then upgrade. I've tried without much success to get the Google Apps Sync to work without doing the steps I did above, and would best save you much time of having to go thru the learnings that I went thru.

Just FYI, if you tried setting up Google Apps Sync on Outlook 2013, you may encounter some of these issues:

1. After downloading the Google Apps Sync tool, and installing it, you will get this error:Your Microsoft Outlook (r) installation requires a 64-bit version of Google Apps Sync to work properly.  Please download and install the 64-bit version of Google Apps Sync.

For some reason, when you're at https://tools.google.com/dlpage/gappssync, it will download the wrong version if you have Office 2013 installed. I then tried to get the installer package directly from the source here:
Download 32-bit enterprise_gsync.msi (Outlook 2003, 2007, 2010 32-bit edition)
Download 64-bit enterprise gsync.msi (Outlook 2010 64-bit edition)

2. Installing the downloaded package is straight forward, however, when you try to set up your Google Account, you will encounter message : "Failed to create profile".

 I've not found a way to get around this error, and again, the only remedy that I could find was to do the above. 

Hopefully you will find this useful and helpful.

MintyBoost v3.0 Assembled with enclosure for sale

If you are interested to purchase this, please leave a comment below. I'm selling this for USD$35.00 + shipping. It comes with the tin enclosure and the MintyBoost kit assembled and tested working (with iPhone 3GS). Batteries, cable (and obviously the phone) are NOT included.

I have only 2 units 1 unit left, so first come first serve. Shipping charges depend on your location.

MintyBoost v3.0

If you own an iPhone, or any mobile phones that allows USB charging, MintyBoost maybe just the extra power pack you'll need if you are constantly on the go and your existing phone battery drains out before you can get to the electrical outlet.

I ordered this kit for USD19.90 from Adafruit Industries. It has everything except the batteries, container, which unfortunately, is hard to get at the moment because Wrigley's, the manufacturer of the Altoids gum has decided to discontinue this product. While the kit is designed to fit in nicely in the Altoids gum tin, it can still be installed in other containers. I got mine from a local Daiso store (Japanese variety store). It's slightly larger than the gum tin, but I think it'll be great as I can use the extra space to store a short cable.

To build the kit, you will need to have some basic electronic tools, and skills of course. The process of building the kit is layout in detailed here. You will not go wrong if you follow the instructions step by step.

The final product (with my version of tin anyways):

Note that my tin does not have the hinged lid. I wished it did though so I won't accidentally misplace the lid. Anyways, considering that this is the only container I could find, it will have to do.

These Eneloop batteries gives roughly about 60% charge. That means that if my phone's battery level falls to about 40-50%, I can get it to 100% with a pair of these batteries. Different batteries will give different results, but the general rule is the higher the mAh, the higher the capacity it can charge.

The opening for the port was done by drilling the tin first, and then using a small file, I filed the edges till I have the shape of the plug. I'm guessing if I had a dremel tool, the results would be better. What do you think?

Here's how it looks like with the lid closed.

Another view.

Barrel Drum BBQ Pit (Charcoal)

I decided to try this project after seeing so many other examples of it on the web. The thing about doing this here in Malaysia is that it can be quite costly as most of the parts are not locally produced. The most expensive part of the pit are the grill plates, which set me back about RM160 as they cost RM80 a piece.




















The drum costs only RM40, but the scary part about this is that I don't know what was in it before. The drum supplier could not tell me either as they get their drums from all over. I bought it anyways after making sure it had no weird odors.

The hardest part of this project would be the cutting of the drum. Since I did not have an arc torch, I got it cut at a nearby workshop instead. All I did was draw the intended portion to be cut, and they did the rest.

Once that was done, I installed the L-braces for the grill plate to rest on, and added an additional metal bar in the middle for extra stability. I also added hinges to the plate to act as a lid to my pit. I had no welder with me, so all these were done using traditional nuts and bolts to secure.

The stand I used is a simple scissors type structure which was carried over from my previous bbq grill.




















I also had the inside of the drum sprayed with a high-temperature paint to prevent corrosion. I got this paint at Ace Hardware.




















Here is the final product:
























Do you have your own version of a barrel drum bbq pit? Share it with me by posting the link on the comments. Thanks for viewing!